| Customization: | Available |
|---|---|
| Application: | Conveyer Equipment, Packaging Machinery, Food Machinery, Mining Equipment |
| Surface Treatment: | Oxygenation |
|
Still deciding? Get samples of US$ 3/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Electrical characteristics | |
| Power supply | A)4.5+24VDC |
| B ) 12.5~+32VDC | |
| Frequency range | 0.1~20khz |
| Operating temperature | -30~125"C |
| Cable length | C).1000mm |
| D)150mm | |
| Output type | NPN |
| Cable | 3-core,0.34mm² unshielded |
| Current Load | <40mA |
| Short circuit immunity | Outputs against ground, outputs against power supply Vcc, max 50mA |
| Reverse polarity protection power supply lines | Yes, at correctly wired outputs (max,50mA) |
| Output | Rectangle frequency signal ,open collector ,without pull-up |
| VLow<0.6V | |
| Output signal level | 50%±10% |
| Insulation strength | 500V dc |
| Rise/fall time | <10μs |
| Max. pressure on sensing surface | Dybanic:275ba Static:275bar |
| Environmental resistance | |
| Random noise | Reference standards: En 60068-2-64 a=0.05g²(RMS10g): f=20~2000hz: Duration per axis(xyz):5h |
|
| Shock | Reference standards: EN60068-2-27 Type of shock: Half sine: acceleration amplitude:=100g: shock duration:6ms. shock per axis(xyz):12 |
|
| Ip67 protection | Reference standards: En 60529 | |
| Ip6k9 protection | Reference standards: iso 20635 | |
| Salt spray test | Reference standards: En 60066-2-11 Test duration:48h |
|
| Temperature cycle test | Reference standards: En 60088-2-14 Temperature:-40+125ºC(-40+257"F) Transition time:5kimin Hold time:15min Number of cycles:100 |
|
| Temperature shock test | Reference standards: En 60066-2-14 25min@140ºC(284F)air 10min@20ºC(68"F)water NUMBER OF CYCLES:20 |
|
){kind=link}