Our flow switches are designed to prevent catastrophic failure of the torchand ports in the event of low coolant flow. The typical flow rate are 1 ti 1.50 gallons minute.
At the same time, our level and temperature switches are used in the collant reservoirs, made of plastic or metal tank for holding the torch coolant.
Characteristic
Parts name: Material and parameter
Farts:
Housing Brass C37700
Piston PVC or PBT
Spring Stainless steel
Retaining rings Stainless steel SUS 304
Operating pressure 300 PSI max
Temperature range -40~125deg. C
Carry current 1.5A
Switch current: 1.0Amax
Switch voltage: 300Vac, 250Vdc
Power rating: 70VA
Lead wire AWG 22, to 18, 300mm length, UL1430, free lead wire
Flow range: 0.75L~8.0L/min
Set point Accurancy: 10% max
Set point Differentive: 15%
Repeatability: 2% max
Mounting: Mounting orientation (Horizontal or vertical) as signal of flow direction Mounting orientation
Mounting thread: FNPT. 3/4",
Adequate filtration and sealing Procedures should be used when mounting in flow line
| Item |
Technical Parameter |
| Compatible |
Clean fluid |
| Accuracy |
±3% of reading |
| Repeatability |
±0.5% of reading |
| Nominal Flow Rates |
From 0.1 to 1.0 or 0.8 to 10 gpm |
| Temperature and Pressure |
16 bar @ 20ºC |
| Rotor |
PP or client required |
| Body |
PP or client required |
| Bearings and Shaft |
Ceramic or SUS304 1/2" 1/4" 3/8" flexible tubing |
| Input Power |
5 to 24 VDC @ 1.0mA max |
| Output Signal |
Open collector NPN transistor sinking a maximum of 30mA |
Audited Supplier 
){kind=link}
){kind=link}