Angular Displacement Sensor Angle Sensor Rotary Position Sensor Winkel Sensor Crankshaft Postion Sensor Angle Transducer Angle Pick-off Non-Contact Angle Ensor

• Customization: Available
• Type: Magnetic Displacement Sensor
• Output Signal Type: Analog Type
• Model NO.: ADS
• Movement: Angular Displacement
• Production Process: SemiConductor Integrated
• Material: Plastic
• Accuracy Grade: 0.1G
• IP Rating: IP67
• Certification: RoHS
• Customized: Customized
• Function: Single Turn Hall Effect Rotary Angle Sensor
• Transport Package: Standard Export Package
• Trademark: Yuanben
• Origin: China
• HS Code: 9026100000
• Production Capacity: 5000

Product Description

ADS series Hall-effect Rotary Angle Displacement Sensors with External Actuator

Yuanben ADS series Rotary Angle Displacement Sensors may potentially be mounted adjacent to the pedal to measure how far the pedal is depressed or released by the operator. The sensor senses the change in pedal positioni  and sends a signal to the engine control unit to either increase or reduce the flow of gasonline and air accross the throttle plate,as needed. 

 

Commodity Parameter	Electrical data
Measurement range	20°-360°,increment is 1°
Supply Voltage	9V to 30Vdc unregulated,5Vdc±0.5Vdc regulated.
Supply current	≤25mA(Each channel 12.5mA)
Provides reverse propality protection	Yes
Ground short circuit protection output	Yes
Provide short circuit protection output	Only in 5V regulation mode
Overvoltage protection	up to 40V(-40ºC~60ºC)
Power-on settlement	<1s
Resolution 12 bits	0.025% of measurement range
Output range	±1% of range in 5V regulated power mode
	±1% of measurement range ±3% of output in unregulated 9-30V power mode
Nonlinear	<±0.4%
Temperature coefficient	Less than ±30PPM/ºC in 5V regulated power mode
	Less than ±90ppm/ºC in 9-30V power mode
Output(see drawing 2)
Options	Ratio Analog or Analog
Direction	Factory programming sets to increase or decrease with CW Axis rotation.
Analog output options
Voltage output range(9-30V power supply)	within the measuring range 0.5V-4.5V's voltage
Voltage output range(5V power supply)	Ratiometric output voltage from 10%-90%
	The Voltage supply is monotonic within the measurement range between
	0.25V(5%)to 4.75V(95%) nominal voltage.
Load resistance	<10KΩ(Resistance to ground)
Step response time	Typical 4mS
Output noise	<1mVrms
Frequency response	Norminal 40Hz(-3dB)
PWM output option
PWM frequency	244Hz+/-20% over temperature range
PMW Level(9-30V power supply)	0V and 5V Norminal 0V and V power supply
PWM Level(5V power supply)	Exceeding the measuring range 10%~90%
Monotonic range	5%95% Norminal Value
Mechanical parameters	Mechanical angle torque
Mechanical angle torque	360° continuous
Maximum running speed	3600 o/s
Weight	<35g
Installation	2*M4 Screws
Cable outlet	500mm 4-core cable FDR-25 jacket 55A specification cable(black=ground,red=V+power, yellow=output 1,white=output2)
	When the shaft and cable outlet are aligned,the sensor is in the middle electrical angle.