The Magnetic guiding sensor developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output voltage proportional to the rate of turn at its magnetic path centre axis.
| Item |
parameter |
Remark |
| Product Model |
MGS Series |
MGS |
| Main Material |
Aluminium Alloy |
|
| Power Supply |
9~24VDC |
|
| Load Current |
100mA (max) |
|
| Output bits |
16 bit |
|
| Output mode |
Digital signal |
|
| Operation air gap |
35-40mm |
|
| area |
±100mm |
|
| Output structure |
NPN open-collector output |
|
| Signal type |
VOL≤0.6V |
VCC=12V |
| VOH≥11V |
| Protect circuit |
Short-circuit protection polarity protection |
|
| Insulation resistance |
50MΩ(min) |
|
| Electrical connection |
20PIN connector |
|
| 8PIN connector |
|
| Response time |
Parallel |
1ms MAX |
| Serial |
8MS |
| Tensile strength |
5kg |
|
| Service life |
3 years |
|
| |
|
|
| |
|
|
Audited Supplier 
){kind=link}
){kind=link}