Ads Series Hall-Effect Rotary Angle Displacement Sensor with External Actuator

• Customization: Available
• Type: Angle Displacement Sensor
• Output Signal Type: Analog Type
• Model NO.: ADS Series
• Movement: Angular Displacement
• Material: Plastic
• IP Rating: IP68
• Certification: CE
• Customized: Customized
• Transport Package: Standard Export Package
• Trademark: Yuanben
• Origin: Shanghai
• Production Capacity: 100, 000PCS/Year

Product Description

ADS series Hall-effect Rotary Angle Displacement Sensor with External Actuator
ADS Series Hall-effect Rotary Angle displace Sensors provide non-contact sensing in harsh transportation and industrial applications at a competitive cost.
ADS Series: Takes non-contact sensing to the next level by separating the magnet from the sensor body. The absence of the actuator shaft removes the wear and tear on the bearings caused by radial forces.  A choice of a bare or a housed magnet is available.
These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range. Rotation of the actuator changes the magnet's position relative to the IC. The resulting flux density change is converted to a linear output.
The IC, together with conditioning and protection circuitry, is sealed in an IP69K-qualified rugged package for durability in most harsh environments.
Multi operating ranges from 60° to 360° are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc.
 

Features
True, non-contact operation
unlimited rotation (RAS Series)
Solid-state Hall-effect technology
Rugged IP69K-sealed package with integral connector
Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit protection
Industry-standard AMP termination, 32 mm mounting pitch, North American or European pin-out styles, and compact package
Multi operating ranges up to 360°
Potential Applications

TRANSPORTATION
Position and movement detection (pedals, throttles, gear shift, levers, steering, linkages, and hitches) in trucks, buses, off-road vehicles, cranes, and industrial/ construction/agricultural vehicles and equipment)
Suspension/kneeling position (buses, trucks)
Tilt/trim position (boat engines, tilling equipment)

INDUSTRIAL
Valve control
HVAC damper control
Irrigation equipment pivot control

Hall-effect Rotary Angle Displace Sensors

Electrical Specifications

Characteristic	ADS  series (Low Voltage)
Supply voltage	5 ±0.5 Vdc
Supply current:   Normal	20 mA max.
During output to ground short	25 mA max.
Output:      standard	0.5 Vdc to 4.5 Vdc   Ratio-metric
inverted	4.5 Vdc to 0.5 Vdc   Ratio-metric
Output signal delay	4 ms typ.
Reverse polarity protection	-10 Vdc
Overvoltage protection	10 Vdc
Output to ground short circuit	continuous
Resolution	12 bit
Output load resistance  (pull down to ground)	10 kOhm typ.
EMI:  radiated immunity	100 V/m per ISO11452-2 from 200 MHz to 1000 MHz
EMI:   conducted immunity	100 mA BCI per ISO11452-4,  from 1 MHz to 200 MHz

 

able 2. Mechanical Specifications

Characteristic	ADS Series  (Low Voltage)
Expected life	infinite rotation
Air gap: bare magnet actuator	3,00 mm ±0.5 mm [0.12 in ±0.02 in]
Air gap: housed magnet actuator	2,00 mm ±0.5 mm [0.08 in ±0.02 in]
misalignment	2.002,00 mm [0.08 in] max.
Material:
magnet	NdFeB
sensor housing	PBT plastic
housed magnet over-mold  sensor/	PPS plastic
housed magnet bushing sensor bushing	brass
Mating connector	AMP Super-seal 282087-1
Mechanical end stop	no
mounting screw sizes: sensor to mounting surface	non-magnetic, stainless steel M4 X 0.7 screws and 8 mm [0.31 in] OD washers
housed magnet actuator to actuator mounting shaft	non-magnetic, stainless steel M3 X 0.5 plain cup point set screws
Approvals	CE

Table 3. Environmental Specifications

Characteristic	ADS Series (Low Voltage)
Operating temperature range	-40 °C to 125 °C [-40 °F to 257 °F]
Ingress protection	IP69K
Media compatibility	heavy transportation fluids
Shock1	50 G peak
Vibration1	20 G peak
Salt fog	bare magnet: 96 hr for as per ASTM B117
	housed magnet: 240 hr per ASTM B117

NOTICE
Ferrous material or magnet material more than 300 Gauss within 10 mm [0.39 in] from sensor boundary may impact sensor performance.

Available Configurations

Actuator Type	Series	Actuator Type
Integral shaft without lever		Separate bare magnet