Magnetic Guidance Sensor Mgs-H06 for Agv Application

Product Details
Customization: Available
Principle: Magnetic Sensors
Range: 0-3m
Still deciding? Get samples of US$ 1/Piece
Order Sample
Shipping & Policy
Shipping Cost: Contact the supplier about freight and estimated delivery time.
Payment Methods:
visa mastercard discover JCB diners club american express T/T
PIX SPEI OXXO PSE OZOW
  Support payments in USD
Secure payments: Every payment you make on Made-in-China.com is protected by the platform.
Refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Secured Trading Service
Gold Member Since 2005

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Plant Area
4200 square meters
  • Magnetic Guidance Sensor Mgs-H06 for Agv Application
  • Magnetic Guidance Sensor Mgs-H06 for Agv Application
  • Magnetic Guidance Sensor Mgs-H06 for Agv Application
  • Magnetic Guidance Sensor Mgs-H06 for Agv Application
  • Magnetic Guidance Sensor Mgs-H06 for Agv Application
  • Magnetic Guidance Sensor Mgs-H06 for Agv Application
Find Similar Products
  • Overview
  • Technical Details
  • Detailed Photos
Overview

Basic Info.

Model NO.
MGS-H06
Measurement Accuracy
0.1
Accuracy
0.1%
Kind
Liquid Level Transmitter
Structure
All in One
Warranty
1 Year
Certification
CE
Material
SS304
Process Temperature
-20℃~80℃
Working Mode
Unmanned
Driving
Positive Operation
Falling Prevention Device
Pull-Type
The Vehicle Inlet and Outlet
Center
Design
Single Post
Lift Mode
Combination
Voltage
DC 24V
Type
Magnetic Guidance Sensor for Agv
Appliance
Agv
Transport Package
Standard Export Package
Specification
CCC
Trademark
yuanben
Origin
Shanghai
HS Code
9033000000
Production Capacity
1000/Month

Packaging & Delivery

Package Size
1.00cm * 1.00cm * 1.00cm
Package Gross Weight
1.000kg

Product Description

Magnetic Guidance Sensor for AGV appliance


The Magnetic guiding sensor developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output voltage proportional to the rate of turn at its magnetic path centre axis.
Technical Details
 

 

Product Model MGS-H-S-2-C20
Product Number MGS-H06
Material Of Housing Aluminum Case
Supply voltage
+24 VDC ±5%, ripple (p-p) 1% max.
Power consumption 35mA max. (at DC+24V)
70mA max. (at DC+12V)
75mA max. (at DC+5V)
Digital type Output NPN Transistor Open Collector
Normally open

Applicable voltage 30V max.

Sink current 100mA max.
Operation Temperature -10ºC to +50ºC (Non-freezing)
Operation Humidity 35 to 95%RH (Non-condensing)
Prevent Class IP65
Storage Temperature from -30 to +80ºC
Storage Humidity from 35% to 95%RH (no condensation)
Target MGT-50 -25 series magnetic guide tape
Operation Air Gap 30 to 40mm (standard MGT-50-25)
Sensitivity N-pole;6mT and over/ S-pole; 6mT and over
Element 6 bits
Pitch 10mm at even intervals
Logic Normally open
Circuit NPN open collector (DC30V, 50mA max.)
Residual voltage 2V max. (at 50mA)
Response 1ms
Insulation Resistance 50MOhm
Connector MIL-C-83503, 20Pin
Prevent circuit Over-voltage and short circuit and reverse polarity protection
Mounting Both Centre axis line of magnetic tape and sensor is Coincide
Appliance AGV
Detailed Photos

Magnetic Guidance Sensor Mgs-H06 for Agv ApplicationMagnetic Guidance Sensor Mgs-H06 for Agv Application

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now