Customization: | Available |
---|---|
Type: | Magnetic Displacement Sensor |
Output Signal Type: | Digital Type |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The Magnetic guiding sensor MGS-2463-H15P developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output 15 BIT switches signal, turn at its magnetic path centre axis.
The sensor can guide vehicles with the help of small magnetic field installed along the magnetic guide path, in the floor. the AGV magnetic guide path is normally 50mm width and 1.0~1.5 thickness, the cost to install such guide path is a fraction of the cost of other type guide wire installation.
Magnetic guidance path can easily be installed in wood floors and other types of environment not well suited for guide wire installation.
Item | Parameter | Remark |
Product model | MGS-H-S-20-C20-N-R | MGS-H-S-C |
Product code | MGS-2443-H16R | |
Main material | Aluminum alloy | |
Power supply | 9 to 24VDC | |
Load Current | 100mA (max) | |
Output bits | 16 bit | |
Output mode | Digital signal | |
Operation air gap | 35 to 40mm | |
area | ±100mm | |
Output structure | NPN open-collector output | |
Signal type | VOL ≤ 0.6V | VCC = 12V |
VOH ≥ 11V | ||
Protect circuit | Short-circuit protection Polarity Protection | |
Insulation resistance | 50MΩ(min) | |
Electrical connection | 20PIN connector | Parallel signal output interface MIL-C-83503 compliant |
8PIN Flange socket | RS-485 interface | |
Response time | Parallel | 1ms MAX |
Serial | 8ms @19200(Baud rate related) | |
Tensile strength | 5kg | Between socket and housing |
Service life | 3 years | |
Operating Temperature | -25 to +75ºC | |
Operation Humidity | 90% max | |
Machinery vibration | 7g | F = 20 to 400Hz |
Mechanical shock | 10g/16ms | 1000 times |
protection levels | IP65 | |
ESD protect | 4.5KV |