High Frequency RFID Reader (13.56 MHz) Rfh-1232-114A

• Customization: Available
• Type: Microwave Sensor Switch
• Application: Warehouse
• Model NO.: RFH-1232-114A
• Transport Package: Carton
• Trademark: Yuanben
• Origin: Shanghai
• HS Code: 85299050
• Production Capacity: 50, 000PCS/Year

Product Description

High Frequency RFID Reader (13.56 MHz)
1.Overview
The RFID (Radio Frequency Identity) reader and writer is specially designed for use in embedded applications such as address reading or proximity control of AGV and industrial application. It has anti-collision function.

2. Key Features
Comply with ISO 15693 Protocol and ISO14443A protocol
Support NXP I. CODE SLI and other Chips in line with the ISO15693 Protocol,
Support reading and writing, complies with ISO/IEC 18000-3 Mode
Physical Interface
RS 232 with Cable(1.0 M long), RS 485 and Ethernet (TCP/IP) can be selectable
Built in RFID antenna (Integration Design of Reader and Antenna)
Read / write distance 75-90mm (industry Environment), reading time is less 20 ms
The RFID sensor can read or write tag yet,no data leak
Good package IP65, PBT engineering material suit industry environment application
Used in AGV and auto fork truck application

3. Applications
Address reading or proximity control of AGV and industrial production line material identification application.

4. Technical Data sheet
 

Operating Frequency	13.56MHz
Working Voltage	10-30Vdc
Working current	350mA
Standard Interface	ISO/IEC 15693 and 14443A
Compliance interface	ISO18000-3 mode
Reading distance	75-90mm
Reading time	20ms/8 bit
Radiation Power	250mW
Interface	RS232;RS485 and TCP/IP(opinion)
Indication	2 Led ( red led for power, Green led for working )
Mounting Hole	4*Φ6mm
Working Temperature	-20ºC~+70ºC
Storage temperature	-20ºC~+85ºC
Working humidity	<95%
Cable	5 core shield (800mm) or (M12 connectors opinion)
Color of Housing	Green and black Housing. Black face is testing surface
Material of Housing	PBT
Dimension	As attached drawing
IP class	IP65 Industry Environment

5. RFID Sensor with Host Computer Communication Data Packet Format (RS-232)
Command format
This data message format is used for communication between the RFID (HF) sensor and the host computer (controller). The host computer sends commands (downstream) and the RFID sensor responds (upstream).This communication port baud rate is 9600, data is 8 bit, no odd check, stop bit is a bit.
Command format

Frame header 01

Data length

Data1

Data2

…

Data N

Checksum (CAL)

End of frame FD

Data length:The length of the Data1~Data N(=N);
Checksum(CAL):From the data length to Data N (N+1 number) sum, take the lower 8 bits.
Note:The data is a hexadecimal number in the table.

6.  Product Photo

Drawing