Fst-1271-009c Brass Material Turbine Flow Sensor Water Flow Meter Gasoline Kerosenes Similar Viscosity Non-Corrosive Liquids

• Customization: Available
• Measuring Medium: Liquid
• Output Signal Type: Analog Type
• Model NO.: FST-1271-009C
• Production Process: Integration
• Material: Metal
• Accuracy Grade: 0.1G
• IP Rating: IP65
• Certification: RoHS
• Customized: Customized
• Transport Package: Export Package
• Trademark: Yuanben
• Origin: China
• HS Code: 9026100000
• Production Capacity: 50000/Year

Product Description

 

FST-1271-009C Flow Sensor

1. Description

FST-1271-009C flow sensor is a vane type flow sensor developed by our company, is used for testing the fluid with large flow in big pipe, ideal for high liquid pressure system. This series flow sensor can work under the wide voltage range with low pressure loss,high precision. Our company has been cooperated with many famous manufacturers of water heater at home and abroad. the ends thread is NPT2", easy to installation.

2 Feature and Application 
Feathers
1. Low starting pressure, Wide measuring range(10~40L/min)
2. Low pressure loss,high precision
3. pulse signal output
4. Brass housing, ideal for high pressure system (3.0 MPa MAX)
Application
The flow sensor is widely used for Water heaters, wall hangings, steam equipment, water treatment equipment, Water distribution system and cooling water system.
3. Product Parameters

Electrical connection	JST-PALR-03V connector
Operation voltage	DC 5V  (4.5-18V)
Operation current	0.5mA (500mA)
Output	duty cycle 50%±10%, pulse signal
Resistance between terminal and housing	>100MΩ(DC 500V)
Service life	2 years
Flow of the starting water	< 1L/Min
Pressure of the starting	< 0.1 MPa
Flow detection range	10-40 L/Min±10%
Range of temperature	-10ºC~+105ºC
Liquid	Clean water
Operation pressure	3MPa,Max
Flow simulation formula	Hz=1.5×Q  (frequency= 1.5* flow)

4.Product dimension



Cable 1) Red: + position, 2) Black - navigation, 3) White: Output.
Cable length: 2000mm

5.  Installation and attention
The NPT 2"threaded both ends of flow sensor, mounting the flow sensor in fluid pipe line, and according to the mark "in" and "out" or arrow  of fluid flow on the flow sensor body. The sealant or raw material tape can be used, , but  must pay attention to the raw material tape cannot enter the fluid pipe line, when rotating the thread of flow sensor,
we can also provide the product according to customer requirement.