High Frequency RFID Reader Writer for Industrial Use

Product Details
Customization: Available
Read-Write Method: Non-Contact Type
Installation: External (634)
Still deciding? Get samples of US$ 200/Piece
Request Sample
Gold Member Since 2005

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Plant Area
4200 square meters
  • High Frequency RFID Reader Writer for Industrial Use
  • High Frequency RFID Reader Writer for Industrial Use
  • High Frequency RFID Reader Writer for Industrial Use
  • High Frequency RFID Reader Writer for Industrial Use
  • High Frequency RFID Reader Writer for Industrial Use
Find Similar Products

Basic Info.

Model NO.
RFH-1332-114D
Type
RFID Card
Material
PBT
Function
Information, Encrypt/Decrypt, Identification
Structure
RFID Card
Data Transmission Mode
Parallel
Application Field
Non-Fiscard
Transport Package
Standard Export Package
Trademark
Yuanben
Origin
Shanghai
Production Capacity
50, 000 PCS/Year

Product Description

High Frequency RFID Reader (13.56 MHz)

P/N: RFH-1332-114D
  1. Overview
The RFID (Radio Frequency Identity) RFH-1332-114D is a non-contact high frequency RFID reader, specially designed for use in embedded applications such as address reading or proximity control of AGV and other industrial application. It can be worked in a variety of harsh environments. The RFID reader has anti-collision function, its operating frequency is 13.56MHz.

2. Key Features
Comply with ISO 15693 Protocol and ISO/IEC 18000-3 Protocol; ISO14443A protocol.
Support NXP I. CODE SLI and other tags in line with the ISO15693 Protocol.
Support reading and writing, no data missed reading.
RS 485 with Cable(1.0M long), RS 232 and Ethernet (TCP/IP) can be selectable.
Built in RFID antenna (Integration Design of Reader and Antenna)
Read / write distance 70-90mm (industry Environment), reading time is less 20ms /8bit.
Good package IP65, PBT engineering material suit industry environment application
3. Applications
Address reading or proximity control of AGV,forklift and industrial production line material identification application.

4. Technical Data sheet
Operating Frequency 13.56MHz 
Working Voltage 10-30Vdc
Working current <0.2A
Standard Interface  ISO/IEC 15693 and 14443A
Compliance interface ISO18000-3 mode
Maximum Reading distance 70-90mm
Reading time 20ms/8 bit
Radiation Power  2W 
Interface RS232;RS485 and TCP/IP(opinion) 
Indication  2 Led ( red led for power, Green led for working )
Working Temperature  -20ºC~+70ºC 
Storage temperature -20ºC~+85ºC 
Working humidity <95% 
Cable 5 core shield (800mm) or (M12 opinion)
Color of Housing Green Housing
Material of Housing PBT
Dimension  As attached drawing
IP class IP65 Industry Environment


5. Dimension and picture                          

 High Frequency RFID Reader Writer for Industrial Use


High Frequency RFID Reader Writer for Industrial UseInstallation location dimension:4-φ3mm*6mm

6. Wiring Diagram
 
Cable number color Pin configure
2 Brown Vin   9-30vdc
4 Blue GND
1 White A
5 Grey B
High Frequency RFID Reader Writer for Industrial Use




 7. RFID Sensor with Host Computer Communication Data Packet Format

This data message format is used for communication between the RFID (HF) sensor and the host computer (controller). The host computer sends commands (downstream) and the RFID sensor responds (upstream). The communication port baud rate is 9600, data is 8 bit, no odd check, stop bit is one bit.
Command format
 
Frame header
01
Data length Data1 Data2 Data N Checksum (CAL) End of frame
FD
Data length:The length of the Data1~Data N(=N);
Checksum(CAL):From the data length to Data N (N+1 number) sum, take the lower 8 bits.
Note:The data is a hexadecimal number in the table.
  1. Start to read tag
  2. Stop reading tag
  3. Reading 15693 tag data
01 02 42 47 8B FD
  01 02 45 44 8B FD
01 03 54 52 Block number(0-1bit) CAL FD
Respond
01 04 XX XX XX XX CAL FD
Where from 3 to 6 bytes are read data (4 bytes).
  1. Writing 15693 tag data
01 07 54 57 Block number
(0-1B)
XX XX XX XX CAL FD
Where from 6 to 9 bytes are written data (4 bytes)
Respond (success)
01 04 53 55 43 43 32 FD
  1.  Reading mifare tag data(S70 card)
01 03 4D 52 Block number(0-3F) CAL FD
Respond(success)
01 10 XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX CAL FD
Where from 3to 18 bytes are read data(16 bytes).
  1. Writing mifare tag data(S70 card)
01 13 4D 57 Block number
(00-3F)
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX CAL FD
Where from 6  to 21  bytes are written data (16 bytes).
Respond(success)
01 04 53 55 43 43 32 FD
Instruction:
  1. The RFID sensor automatically reads the tag when it is turned on.
  2. The RFID sensor reads the data stored in the tag automatically when the tag is in reading area.
  3. The RFID sensor stops reading the tag automatically after receiving the command to stop reading; and it can be restarted read the card after receiving the reading tag command.
  4. when the mifare tag is used, block cannot be read and written with block numbers 3+4n (n=0, 1, 2...), In other words, the blocks cannot be read and written with blocks numbers 3,7,11....

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier