Type: | Magnetostrictive Displacement Sensor |
---|---|
Output Signal Type: | Digital Type |
Movement: | Angular Displacement |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Electrical | |
Output Voltage: | 1V (coil 1), 0.5V (coil 2) RMS measured with a 12 pitch gear @ 1kHz, .028" probe gap |
Coil Resistance | 300/600 ohm +/-10% |
Inductance: | 40/80 mH +/-10% |
Insulation Resistance: | 100M-ohm (coil to case) |
Polarity: | With approach of ferrous metal, the white wire (coil 1) or white/red wire (coil 2) is positive with respect to the irpaired black wire. |
Field Strength: | 20 Gauss min. (at sensor tip) |
Mechanical-Environmental: | |
Pole Piece Diameter: | 1/8" or 3/16" |
Operating Temperature: | -65OF to +300OF |
Humidity: | 95% |
Vibration: | 0.036 D.A. displacement, 5-75Hz, 10 g peak, 75-4000 Hz |
Electrical Connection: | Two Teflon jacketed cables, with two 18 AWG wires (white-black & white/red-black). Or M16 connector |
Mounting: | 5/8"-18 UNF-2A Threaded housing with locknut. |
Body Material: | 303/304 Stainless steel, blind (sealed nose) end. |
Conduit Connection: | 1/2"-14 NPT (male thread). |
Encapsulation: | Epoxy resin: black color,300O temperature rating, |
Code of sensor | L1 +/-.03" | L2 +/-.1" | POLE DIA. | |
MEVS2-0342 | 0.40" | 3.60" | 1/8" (.125") | |
MEVS2-0343 | 2.03" | 5.20" | 1/8" (.125") | |
MEVS2-0344 | 3.97" | 7.20" | 1/8" (.125") | |
MEVS2-0345 | 0.40" | 3.60" | 3/16" (.187") | |
MEVS2-0346 | 2.03" | 5.20" | 3/16" (.187") | |
MEVS2-0347 | 3.97" | 7.20" | 3/16" (.187") |
Suppliers with verified business licenses