Magnetic Guide Sensor for Agv Automated Guided Vehicle

• Customization: Available
• Type: Magnetic Displacement Sensor
• Output Signal Type: Analog Type
• Model NO.: MGS-H8
• Movement: Linear Displacement
• Material: Aluminum Alloy
• IP Rating: IP65
• Certification: ISO
• Customized: Customized
• Output Type: 8 Bit NPN Output
• Air Gap: 40mm
• Power Supply: 10- 30 VDC
• Overload Protection: Yes
• Reverse Polarity Protection: Yes
• Target: Mgt-50-25 Series Magnetic Tape
• Transport Package: Carton
• Trademark: Yuanben
• Origin: Shanghai
• HS Code: 85299050
• Production Capacity: 50, 000PCS/Year

Product Description

Magnetic Guide Sensor for Agv Automated Guided Vehicle
The Magnetic guide sensor developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output voltage proportional to the rate of turn at its magnetic path centre axis.

Specificatiaons

Item	parameter	Remark
Product Model	MGS Series	MGS
Main Material	Aluminium Alloy
Power Supply	9~24VDC
Load Current	100mA (max)
Output bits	8 bit (15, 16 bit or customized)
Output mode	Digital signal
Operation air gap	35-40mm
area	±100mm
Output structure	NPN open-collector output
Signal type	VOL≤0.6V	VCC=12V
	VOH≥11V
Protect circuit	Short-circuit protection polarity protection
Insulation resistance	50MΩ(min)
Electrical connection	20PIN connector
	8PIN connector
Response time	Parallel	1ms MAX
	Serial	8MS
Tensile strength	5kg
Service life	3 years

Photos