Hall Effect Gear Tooth Speed Sensor Transducer Transmitter Gvs Series Digital Output

• Customization: Available
• Type: Magnetic Displacement Sensor
• Output Signal Type: Digital Type
• Model NO.: GVS series
• Movement: Angular Displacement
• Production Process: Integration
• Material: Stainless Steel
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• Air Gap: 2mm (0.08inch) Max
• Frequency: 0-100kHz
• Transport Package: Carton
• Trademark: Yuanben
• Origin: Shanghai
• Production Capacity: 20, 000PCS/Year

Product Description

GVS-001 Hall-Effect Gear Speed Sensor
Description 
GVS Series Tooth Sensors use a magnetically biased Hall effect integrated circuit to accurately sense movement of ferrous metal targets. This specially designed I.C., with discrete capacitor and bias magnet, is sealed in a probe type package for physical protection and cost effective installation.
Output is digital, current sinking (open Collector). Reverse polarity protection is standard. If power is inadvertently wired backwards, the sensor will not be damaged.
Optimum sensor performance is dependent on the following variables which must be considered in combination:

• Target material, geometry, and speed
• Sensor/target gap
• Ambient temperature
• Magnetic material in close proximity

Features

1. Senses ferrous metal targets
2. Digital current sinking output (open collector)
3. Better signal-to-noise ratio than variable reluctance sensors, excellent low speed performance, output amplitude not dependent on RPM
4. Sensor electronically self-adjusts to slight variations in runout and variations in temperature, simplifying installation and maintenance
5. Fast operating speed - over 100 kHz
6. EMI resistant
7. Reverse polarity protection and transient protection (integrated into Hall I.C.)
8. Wide continuous operating temperature range

Typical Applications 
Automotive and Heavy Duty Vehicles:

1. Camshaft and crankshaft speed/position
2. Transmission speed
3. Tachometers
4. Anti-skid/traction control, ABS system 

Industrial: 

1. Sprocket speed
2. Chain link conveyor speed and distance
3. Stop motion detector
4. High speed low cost proximity
5. Tachometers, Counters
6. Gear tooth Sensor

Specifications 

Product Type	Hall-Effect Gear Tooth Sensor
Probe Housing	Plastic Probe
Supply Voltage	4.5 Vdc to 24.0 Vdc
Supply Current (max. @ 25 °C)	20mA
Output Type	Square wave signal
Termination Type	Lead Wire
Operating Temperature Range	-40 °C to 150 °C [-40 °F to 302 °F]
Output Voltage	0.4 Vdc max.
Output Current (max.)	40 mA
Vane and Geartooth Target Material	Cold Rolled Steel, 1018 or Low in Carbon (Annealed)
Target RPM	10 RPM min., 3600 RPM max.
Switching Time Rise (10 % to 90 %)	15 µs max.
Switching Time Fall (90 % to 10 %)	1.0 µs max.
Operate Point	3.3 ° ± 1.25 ° [3,28 ° ± 1,13 mm]
Release Point	4.4 ° ± 2.50 ° [4,16 ° ± 2.21 mm]
Availability	Global

* Values measured using 1 kOhm pull-up resistor, millitesla (gauss x 10^-1), and geartooth target dimensions.
 
Target Min Tooth Height  5.06 mm [0.200 in]
Target Min Tooth Width   2,54 mm [0.100 in]
Target Min. Tooth Spacing   10,16 mm [0.400 in]
Target Thickness   6,35 mm [0.250 in]
Target Diameter  101,6 mm [4 in]
Airgap   1,02 mm to 2,03 mm [0.040 in to 0.080 in]
Leakage Current max.   10 µA
Differential   8.4 ° ± 3.70 ° [7,45 ° ± 3,34 mm]

Photos