Mvps-015 Inductive Sensors

Product Details
Customization: Available
Transport Package: Export Package
Trademark: Yuanben
Still deciding? Get samples of US$ 1/Piece
Request Sample
Gold Member Since 2005

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Plant Area
4200 square meters
  • Mvps-015 Inductive Sensors
  • Mvps-015 Inductive Sensors
  • Mvps-015 Inductive Sensors
  • Mvps-015 Inductive Sensors
  • Mvps-015 Inductive Sensors
  • Mvps-015 Inductive Sensors
Find Similar Products

Basic Info.

Model NO.
MVPS-015
Origin
China
HS Code
9026100000

Product Description

MVPS-015 Inductive Sensors
Mvps-015 Inductive Sensors
Mvps-015 Inductive Sensors


 
Approval/Conformity CE
Basic standard IEC 60947-5-2
  IEC 60947-5-7
Function indicator Adjustment indicator
Power indicator no
   
Electrical connection  
   
Connection M12x1-Male,4-pin,A-coded
Polarity reversal protcted yes
Protection against device mix-ups yes
Short-circuit protection yes
Electrical data  
Limit frequency-3 dB 500 Hz
Load resistance RL min. 2000 Ohm
Load resistance RT min. 2000 Ohm
No-load current lo max.at Ue 10mA
Operating voltage Ub 15...30 VDC
Protection class 11
Rated insulation voltage Ui 250 VAC
Rated operating voltage Ue DC 24V
Ripple max.(% of Ue) 15%
Slope U 0.83 V/mm
Temperature output     -9 mV/ºC
Ambient temperature 10...60ºC
Contamination scale 3
EN 60068-2-27,Shock Half-sinus,30 gn.11 ms
   
EN 60068-2-6, Vibration 55 Hz,amplitude 1 mm, 3x30 min
IP rating IP67
Functional safety  
Interface  
Analog output Analog,voltage 0...10V
  Analog.temperature
Output characteristic falling on approach
Output voltage at SI max. 10V
Output voltage at SI min. 0V
Output voltage at Se 5V
Material
Housing material Brass,nickel-plated
Material sensing surface PBT
Mechanical data  
Dimension Ø18x65mm
Installation non-flush
Size M18x1
Tightening torque 25 Nm
Range/Distance  
Linearity range SI 4...16mm
Measuring range 4...16mm
Non-linearity max. ±360μm
Repeat accuracy per BWN ±200μm
Temperature drift max. from end ±3.0%

Remarks
The specified parameters apply to the temperature range of +10...+60 °C. Function is also guaranteed in the ranges -10...+10ºC and +60...+70ºC.
Values referenced to axial approach of St 37 target. For other materials correction factors are applied.
Replacement BAW M18MG-UAC16F-S04G-K
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier