| Customization: | Available |
|---|---|
| Type: | Magnetic Displacement Sensor |
| Output Signal Type: | Digital Type |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Magnetic guiding sensor MGS-2463-H15P developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output 15 BIT switches signal, turn at its magnetic path centre axis.
The sensor can guide vehicles with the help of small magnetic field installed along the magnetic guide path, in the floor. the AGV magnetic guide path is normally 50mm width and 1.0~1.5 thickness, the cost to install such guide path is a fraction of the cost of other type guide wire installation.
Magnetic guidance path can easily be installed in wood floors and other types of environment not well suited for guide wire installation.
| Product Model | MGS-H-S-20-C20 |
| Product Number | MGS-2463-H15P |
| Material Of Housing | Aluminum Case |
| Supply voltage | +24 VDC ±5%, ripple (p-p) 1% max. |
| Power consumption | 35mA max. (at DC+24V) |
| 70mA max. (at DC+12V) | |
| 75mA max. (at DC+5V) | |
| Digital type Output | PNP Transistor Open Collector Normally open Applicable voltage 30V max. Sink current 100mA max. |
| Operation Temperature | -10ºC to +50ºC (Non-freezing) |
| Operation Humidity | 35 to 95%RH (Non-condensing) |
| Prevent Class | IP65 |
| Storage Temperature | from -30 to +80ºC |
| Storage Humidity | from 35% to 95%RH (no condensation) |
| Target | MGT-50 -25 series magnetic guide tape |
| Operation Air Gap | 30 to 45 mm (standard MGT-50-25) |
| Sensitivity | N-pole;6mT and over/ S-pole; 6mT and over |
| Element | 15 bits |
| Pitch | 20mm at side and 5mm at central |
| Logic | Normally open |
| Circuit | PNP open collector (DC30V, 50mA max.) |
| Residual voltage | 2V max. (at 50mA) |
| Response | 1ms |
| Insulation Resistance | 50MOhm |
| Connector | MIL-C-83503, 20Pin |
| Prevent circuit | Over-voltage and short circuit and reverse polarity protection |
| Mounting | Both Centre axis line of magnetic tape and sensor is Coincide |
| Appliance | AGV |
){kind=link}