Mei-58 Magnetic Incremental Encoder Be Customized

• Customization: Available
• Product Type: PE Water-supply Pipes
• Screw No.: Multi-screw
• Model NO.: MEI-58
• Computerized: Non-Computerized
• Certification: CE, ISO9001:2008
• Customized: Customized
• Condition: Used
• Type: Rotary Encoder
• Working Principle: Incremental
• Readout Mode: Contact
• Operating System: Magnetoelectric Type
• Signal Output: Complementary Push-Pull Output
• Axle Sleeve Type: Empty Type
• Package: PGA
• Installation Form: Axle Sleeve Type
• Axonia: Servo Installation Type
• Brand: Yuanben
• Encoder: Magnetic
• Transport Package: 40PCS/Package
• Specification: CE, RoHS
• Trademark: yuanben
• Origin: China
• HS Code: 90330000
• Production Capacity: 5000PCS/Months

Product Description

MEI-58 magnetic incremental encoder is by design, a rugged cost-effective industrial grade product that uses magnetic technology to address the weakness of the more frangible optical encoder counterpart. Intended for low resolution applications, it functions as an incremental angular position encoder when used with a multi-pole permanent magnet target wheel. Direction of rotation can be obtained from the two output channels that are 90° electrically out of phase. The final PPR count can be selected by magnetic pole count of the permanent magnet target.  high performance, cost-effective 1Vpp Sine/Cosine output magnetic encoders for harsh or difficult environments.
Features:

Magnetic Encoder Pulse Counts up to 3560 Counts per Channel
2 Channel Quadrature Magnetic Encoder Channels
Designed to be used with a P44 Magnet Target Wheel ()
Low Profile Housing of only 1.9 inches
Working Temperature range  -40 to 125 ºC
Rugged Aluminum Housing
Through Hole or Blind Hollow Housing Available
Non-slotted Bolt Hole Pattern upon request
Available with or without internal pull resistors
Single-Ended or differential outputs for ABI
U/V/W commutation outputs(Open-collector or differential)
8 to 8192 pulses per revolution (PPR)
Powered from external +5VDC/24 VDC/12 VDC power supply
Current consumption low to 50mA
Max speed to 30000 RPM
Operating temperature of -40 to +85 ºC
Allows for a variety of solid shaft, hollow shaft and blind hollow shaft
 

Model			MEI 58Incremental Encoder
Output electrical specifications	Resolution ratio(P/R)		4096
	Control output	Output code/output angle	Refer to output waveform
		PNP open collector output	Output voltage:Min(supply voltage-1.5)Vdc, load current:Max:80mA
		NPN open collector output	load current Max :80mA, residual voltageMax:1Vdc
		TTL voltage output	load current Max :80mA, residual voltageMax:0.4Vdc
		Analog voltage output	0-5V analog signal
		Analog current output	4-20mA analog signal
	Response time (rise/drop)		≤1μS
	response frequency ( max)		100 kHz
	Supply voltage		5Vdc±5% (wave P-P:Max.5%), 12-24Vdc±5%(wave P-P:Max.5%)
	Consumption current		Max. 35mA( non-loaded)
	Insulation resistance		Min 100M Ω( based on 500Vdc)
	Insulation strength		750Vac 50/60Hz, 60S duration(between terminals and housings)
	Connection		Radial or axial shielded cable exit
Mechanical parameters	Start torque		Max: 5×10-3 N.m
	Inertia torque		9.8×10-8 kg.m2
	Shaft load		Radial  20N , axial 10N
	Shaft position deviation		Radial≤0.1mm , axial≤0.2mm
	allowable speed (max)		5000rpm
Environmental parameters	Operating temperatureºC		-10~70 ºC (non frozen),
	Storage temperatureºC		-25~85ºC
	Humidity %RH		35~90%RH
	Protection grade		IP54 -IP65
	Cable		1M long, shielded cable