| Customization: | Available |
|---|---|
| Type: | Optical Displacement Sensor |
| Output Signal Type: | Digital Type |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The angle sensor is used for measuring angles between 30° and 120°. The is based on the contactless Hall measurement principle, which is extremely reliable and ensures a long service life. Due to high protection class IP67, the sensor can be used reliably even under tough environmental conditions. Owing to their robustness, the sensors are particularly suitable for measuring the angular positions of rotating elements under extreme environmental conditions, e.g. on mobile machinery, in cranes, excavators, ships, mobile and stationary waste compactors, valve controllers, robot technology and wind turbines or in large medical devices.
| FUNCTION | Single turn Hall effect rotary angle sensor |
| MEASURING SIGNALS | |
| OUTPUT VOLTAGE | CH1 0.5...4.5V@5V supply CH2 0.25...2.25@5V supply |
| MEASUREMENT ANGLE RANGE | 50,60, 90,120,180,270 |
| MECHANICAL ANGLE RANGE | 360° continuous, no mechanical stop |
| ZERO ANGULAR POSITION | 180° respect to electrical connections |
| OUTPUT SIGNAL DIRECTION | Coherent output (channel 1-2CCW) |
| LINEARITY | CH1<±0.5% of measurement angle range |
| TEMPERATURE COEFFICIENT | Typical ±50 ppm/ºC |
| SUPPLY VOLTAGE [Us] | 5Vdc±10% |
| OVER VOLTAGE | 5.5Vdc(continuous),up to 6Vdc @,25ºC for 24h |
| POLARITY PROTECTION | Reverse polarity protection up to-6Vdc |
| POWER CONSUMPTION | <11mA/channel(no load condition) |
| LOAD RESISTANCE customer input | >10kOhm |
| OUTPUT PROTECTION | Short circuit to GND/+10V for 24h up to+14V(<200s@25ºC) |
| ENVIRONMENT | |
| OPERATING TEMPERATURE | -40...+85ºC |
| STORAGE TEMPERATURE | -40...+85ºC |
| SEALING | IP67(IPX9K with TE 1-967616-1 cod A connector) or equal |
| LIFE TIME | 35M operations-75...+75deg@120rpm |
| MECHANICAL REQUIREMENTS | |
| MAX.OPERATING SPEED | 120rpm |
| RELEVANT NORMS REGULATIONS | |
| EMC according to ISO 14982 | Level (Radiated) 150V/m..100V/m BCI Method 150mA.100mA ESD:IEC 61000-4-2 Air discharge:±15kw Direct contact discharge:±8kv |
| ENVIRONMENTAL TEST | Environmental & Electrical test spec for Electronics rv8.2 |
| APPLICATION | Position and movement detection of pedals, throttle, gear shift, levers, linkages, suspension and hitches |
){kind=link}