| Customization: | Available |
|---|---|
| Function Type: | Infrared Range and Communication System |
| Detection Type: | Heat Detectors |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | MEI-38 Incremental Encoder | ||
| Output electrical specifications | Resolution ratio(P/R) | 4096 | |
| Control output | Output code/output angle | Refer to output waveform | |
| PNP open collector output | Output voltage:Min(supply voltage-1.5)Vdc, Load current:Max:80mA |
||
| NPN open collector output | load current Max :80mA, residual voltageMax:1Vdc |
||
| TTL voltage output | load current Max :80mA, residual voltageMax:0.4Vdc |
||
| Analog voltage output | 0-5V analog signal | ||
| Analog current output | 4-20mA analog signal | ||
| Response time (rise/drop) | ≤1μS | ||
| response frequency ( max) | 100 kHz | ||
| Supply voltage | 5Vdc±5% (wave P-P:Max.5%), 12-24Vdc±5%(wave P-P:Max.5%) |
||
| Consumption current | Max. 35mA( non-loaded) | ||
| Insulation resistance | Min 100M Ω( based on 500Vdc) | ||
| Insulation strength | 750Vac 50/60Hz, 60S duration(between terminals and housings) | ||
| Connection | Radial or axial shielded cable exit | ||
| Mechanical parameters | Start torque | Max: 5×10-3 N.m | |
| Inertia torque | 9.8×10-8 kg.m2 | ||
| Shaft load | Radial 20N , axial 10N | ||
| Shaft position deviation | Radial≤0.1mm , axial≤0.2mm | ||
| allowable speed (max) | 5000rpm | ||
| Environmental parameters | Operating temperatureºC | -10~70 ºC (non frozen), | |
| Storage temperatureºC | -25~85ºC | ||
| Humidity %RH | 35~90%RH | ||
| Protection grade | IP54 -IP65 | ||
| Cable | 1M long, shielded Cable | ||
){kind=link}