Our flow switches are designed to prevent catastrophic failure of the torchand ports in the event of low coolant flow. The typical flow rate are 1 ti 1.50 gallons minute.
At the same time, our level and temperature switches are used in the collant reservoirs, made of plastic or metal tank for holding the torch coolant.
| Item |
Technical Parameter |
| Compatible |
Clean fluid |
| Accuracy |
±3% of reading |
| Repeatability |
±0.5% of reading |
| Nominal Flow Rates |
From 0.1 to 1.0 or 0.8 to 10 gpm |
| Temperature and Pressure |
16 bar @ 20ºC |
| Rotor |
PP or client required |
| Body |
PP or client required |
| Bearings and Shaft |
Ceramic or SUS304 1/2" 1/4" 3/8" flexible tubing |
| Input Power |
5 to 24 VDC @ 1.0mA max |
| Output Signal |
Open collector NPN transistor sinking a maximum of 30mA |
Audited Supplier 
){kind=link}
){kind=link}