Product Type:FS-101a Series Flow Switches
Product Description:This is a standard model, Made of Plastic, lower cost, with 3/4"FNPT mounting threads, Using this in-line flow switches to monitor min/max values of liquid flow in order to switches a valve or to establish an on or off control loop
Characteristic
Parts name: Material and parameter
Farts:
Housing Brass C37700
Piston PVC or PBT
Spring Stainless steel
Retaining rings Stainless steel SUS 304
Operating pressure 300 PSI max
Temperature range -40~125deg. C
Carry current 1.5A
Switch current: 1.0Amax
Switch voltage: 300Vac, 250Vdc
Power rating: 70VA
Lead wire AWG 22, to 18, 300mm length, UL1430, free lead wire
Flow range: 0.75L~8.0L/min
Set point Accurancy: 10% max
Set point Differentive: 15%
Repeatability: 2% max
Mounting: Mounting orientation (Horizontal or vertical) as signal of flow direction Mounting orientation
Mounting thread: FNPT. 3/4",
Adequate filtration and sealing Procedures should be used when mounting in flow line
| Item |
Technical Parameter |
| Compatible |
Clean fluid |
| Accuracy |
±3% of reading |
| Repeatability |
±0.5% of reading |
| Nominal Flow Rates |
From 0.1 to 1.0 or 0.8 to 10 gpm |
| Temperature and Pressure |
16 bar @ 20ºC |
| Rotor |
PP or client required |
| Body |
PP or client required |
| Bearings and Shaft |
Ceramic or SUS304 1/2" 1/4" 3/8" flexible tubing |
| Input Power |
5 to 24 VDC @ 1.0mA max |
| Output Signal |
Open collector NPN transistor sinking a maximum of 30mA |
Audited Supplier 
){kind=link}
){kind=link}